ITEM 項目

TEST CONDISTION測試條件

PERFORMANCE規格

6.ELECTRONICAL PERFORMANCE 電氣性能

6.1

CONTACT

RESISTANCE

接觸阻抗

Being measured at 1kHz small current

Contact resistance meter.

在1kHz小電流下測量.

30mΩ max.

30毫歐 以下.

6.2

INSULATION

RESISTANCE

絕緣阻抗

Measurements shall be made following

Application of Dc 500V potential

Across terminals and across terminals

And frame for 1 minute.

在端子之間和端子與殼之間加DC 500V

條件下,持續1分鐘測量.

100MΩ max.

100兆歐 以上.

6.3

WITHSTAND

VOLTAGE

耐電壓

AC 500V (50Hz or 60Hz) shall be

Applied across terminals and across terminals

And frame for 1 minute.

在端子之間和端子與殼之間加AC 500V

(50Hz或60Hz) 條件下,持續1分鐘測量.

There shall be no breakdown.

無擊穿現象出現.

7.MECHANICAL PERFORMANCE 機械性能

7.1

OPERATING

FORCE

動作力

Measure at the point 3mm from the tip

Of the actuator (knob).

在距離推桿前端3mm作測定點.

350gf±100gf

7.2

TERMINAL

STRENGTH

端子強度

A static force of 500gf being applied

In one direction on the tip or the

Terminal for 1 minute.

一個500克之靜電負荷施加于端子頂部的一個方向持續1分鐘.

There shall be no sign of

damage mechanically and

electrically.

無任何跡象顯示機械及電器

性能之損壞.

7.3

ACTUATOR

STRENGTH

推桿強度

A static load of 1kgf being applied

In one direction of actuator for one min

一個1公斤靜負荷施加于推桿之一個方向持續

1分鐘.

The deformation shall not be

extreme and the actuator shall

mechanically work normally.

推桿無變形,可以正常操作.

ITEM 項目

TEST CONDISTION 測試條件

PEREORMALNCE 規格